Deleting a Decoder from Controller

Note: To delete a decoder from the controller, it must not be assigned to a station. If it is assigned to a station you will not see the  icon.

1. Navigate to   → Irrigation controller → Stations
2. Find the station the decoder being deleted is assigned to
3. Click
4. ­­­Select the IO dropdown
5. Change the IO to None
6. Click SAVE
7. Navigate to   → 2-Wire → IO
8. Find the decoder address needing to be deleted
9. Click
10.  Click
11.  Click
12.  Confirm deletion of decoder by selecting DELETE