Adding a SD-110 Sensor Decoder to the NLP

Note: NG & SD-110 decoders are "Auto-discovered" and are automatically added to the NLP controller. SD-110 sensor decoders are universal & require additional configuration that matches a specific sensor. 

1. Navigate to → 2-Wire → Decoder
2. Click
3. Select Discover new decoders (MK3 only). Your will now see the SD-110 listed by address in the decoder list. 
4. Configure the decoder by navigating to IO and search for the sensor decoder address.
5. Select → CONFIGURE
6. Find the correct sensor type in the dropdown list & select APPLY CONFIGURATION.

If you are unsure of your sensor type or do not see your sensor listed, contact Tucor Support.