Adding a Flow Sensor to a Flow Rule

Note: You will need to install the flow sensor via SD-110 sensor decoder, add the decoder to the controller. Adding a flow sensor requires you to add a Flow Rule for alarms. We disable the Flow Rule in this tutorial.

1. Navigate to   → Irrigation controller → Hydraulics
2. Click under Rule of for the "Main" Pipe.  Pipe you'll add the flow sensor to. For customers with >1 flow sensor, select the Rule of the appropriate Main or Sub-Main. 
3. This action will automatically create a flow rule. Mark the Active flag as Off for now. 
4. Click CREATE
5. Click FLOW SENSOR
6. Click
7. Open the IO dropdown and select the address of SD-110 installed with flow sensor.
8. Click CREATE