Manually Start a Station Two Ways

Manually run a station, station group, or all stations from the NLP's controller dashboard. You can manually run stations two ways in the NLP. 

Simplest Station Start

1. From Dashboard, click (Stations)
2. Click ALL
3. Click  for the desired station
4. To stop the station, select. If you do not stop a station, the station will run for 30 minutes. 

Specific Run Time

1. From Dashboard, click (Stations)
2. Click ALL
3. Click for the desired station
4. Select the Action dropdown
5. Choose either Run seconds or Run minutes
6. Enter desired run time in Time field
7. Click SAVE
8. To stop stations that have been manually started, select.